Steps to Consider Before Mounting Your TV on the Wall

Mounting your TV on the wall is a fantastic way to create a sleek, modern entertainment space. But before you grab that drill and start hanging, there are several important steps to ensure a safe, secure, and stylish setup. Follow these tips—and check out our recommended products on Amazon to make your installation smoother!

1. Measure Your Space and Decide on the Mounting Height

The first step is to determine the best height for your TV. A common rule of thumb is that the center of the screen should be at eye level when sitting comfortably—usually around 42-48 inches from the floor. Use a tape measure to mark the ideal height, ensuring a comfortable viewing experience for everyone. Need a sturdy mount?

Check out the Sanus Full Motion TV Mount—supporting TVs up to 90 inches with adjustable tilt and swivel to get perfect angles.

2. Check Your Wall Type and Find the Studs

Not all walls are created equal. Drywall, brick, and concrete—each requires a different approach. For drywall, you'll need to locate the studs (wooden beams behind the drywall). Use a stud finder (see below) to identify the best spots for mounting. Recommended product: 

• Stud Finder—ensures you drill into secure, load-bearing studs for safety.

If you’re mounting on brick or concrete, you'll need specialized anchors and a masonry drill.

3. Choose the Right Mount

Your choice depends on your room layout and TV size. If you want a sleek look with the ability to tilt or swivel, go for a full-motion mount. For a simple, fixed setup, a fixed mount suffices.

Pro tip: Pick a mount rated for your TV size and weight.

Mounting Dream Full Motion Mount is currently the #1 selling mount on Amazon and supports TVs up to 65 inches with its strong construction.

4. Gather Your Tools and Prepare Your Workspace

Make sure you have all the necessary tools:

• Drill

• Stud finder

• Level

• Tape measure

• Pencil for marking

• Screwdriver

Create a clean workspace, and clear the area before drilling.

5. Locate the Studs and Mark Your Mounting Points

Use your stud finder to locate the studs. Mark the points where you’ll drill the brackets, ensuring they’re level. Double-check all measurements before drilling to avoid mishaps.

6. Drill and Install the Mount

Pre-drill holes into the studs, then attach the mounting bracket firmly with appropriate anchors and screws. Use a level to double-check that your mount is perfectly straight.

7. Attach Your TV to the Wall Mount

Finally, hang your TV on the mounted brackets according to the manufacturer’s instructions. Make sure it’s secure, level, and properly balanced.

Final Tips:

• Always use the correct hardware rated for your TV size and wall type.

• Consider the mounting height for optimal viewing comfort.

• If unsure or uncomfortable, hire a professional or follow detailed tutorials online.
  

Mounting your TV can seem daunting, but with the right tools and careful planning, you'll enjoy a clean setup that elevates your entire living space. Need some recommended gear? Check out the links above—each product is top-rated on Amazon and perfect for your project!

Disclaimer: As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.